LW2 V6-3.0L VIN R (2000)
2000 Model Year Only
6.
Open underhood fuse block (UHFB) cover and remove the maxifuses shown at location (I). (Refer to underside of the (UHFB) cover for specific
maxifuse locations.)
^
IGN 0/3/CR 30A
^
IGN 1/2 30A
7.
Replace underhood fuse block (UHFB) cover.
8.
Close hood.
NOTICE: When towing vehicle with all four wheels on the ground, make sure the towing speed does not exceed 65 mph (105 km/h) or your vehicle
could be severely damaged.
NOTICE: Don't tow the vehicle with the front drive wheels on the ground if one of the front tires is the compact spare tire. Towing with two different
tire sizes on the front of the vehicle can cause severe damage to the transaxle.
NOTICE: Too much or too little fluid can damage the transaxle. Be sure that the transaxle fluid is at the proper level before towing with all four wheels
on the ground.
Upon reaching destination:
1.
Shift the transaxle to P (Park).
2.
Turn the ignition key to the OFF position and remove the key from the ignition.
3.
Open hood.
4.
Open underhood fuse block (UHFB) cover.
5.
Replace the maxifuses that were removed previously.
6.
Replace (UHFB) cover.
7.
Close hood.
